


Need Real Answers for your Specific Use Case? Talk to our Engineers
BST CU-19: Clamp-On Current Probe, 500 A (19 mm)
Bay SensorTec GmbH
Generating/Updating Your Configure-to-Order tool...
1
The W5 Engineering Advantage
20+ Years in Testing
All Across North America
Trusted by Industry Leaders
24-Hour Engineering Replies
Secure Order Processing
ISO-Level Quality Assurance
The model BST CU-19 is a sensor to detect current on a cable, based on Hall effect technique. This sensor is for instrumentation or impact testing and many other applications. Due to the 4-wire configuration it is connectable to all data acquisition systems. The very light weight and small size of the sensor which makes it easily mountable with simple open and close clamps can be used on any positions at the car for a crash test or for shock test application. This sensor is for cable diameter up to 19.0 mm.
Due to the anodized aluminium housing it can be used for crash tests. With a 6 m, very rugged, shielded and flexible 5-wire cable all common connectors are mountable. As an option, we supply the sensor with a Shunt resistor and Dallas ID in the connector. A calibration for the sensor is obligatory.
Features
Small Size
High Current Range
High Dynamic Range
Anodized Aluminium Housing
Rugged Housing and Cable
Calibration
Application
Some of the use cases for the BST CU-19 include:
At a Glance
Best for: Hall effect clamp for high-current EV cables, no cable disconnect needed
Range: 500 A max.; DC (0 Hz) to 10 kHz (−3 dB); ±25 mV typ. zero output
Size & mount: 1.73 × 1.50 × 0.75 in (44.0 × 38.0 × 19.0 mm), 2.82 oz (80 g)
Environment: Cable hole 0.748 in (19.0 mm), −4 to 176 °F (−20 to 80 °C), 5 to 10 VDC
BST CU-19 FAQ
5 to 10 VDC.
−4 °F to 176 °F (−20 °C to +80 °C).
Additional cable length, connector, Dallas ID, TEDS, and shunt resistor.
BST CU-19: Clamp-On Current Probe, 500 A (19 mm)
Bay SensorTec GmbH
Generating/Updating Your Configure-to-Order tool...
1

