


Need Real Answers for your Specific Use Case? Talk to our Engineers
BST 28C: WorldSID Triaxial Crash Accelerometer
Bay SensorTec GmbH
Generating/Updating Your Configure-to-Order tool...
1
The W5 Engineering Advantage
20+ Years in Testing
All Across North America
Trusted by Industry Leaders
24-Hour Engineering Replies
Secure Order Processing
ISO-Level Quality Assurance
The model BST 28C is a triaxial accelerometer based on piezo resistive technology. With a four-active arm Wheatstone-Bridge (4 wire system) configuration and a damping ratio helps to connect the sensor on all data acquisition systems. The light weight and small size of the sensor makes it easy to mount it on difficult places at the car for a crash test or flatter test application.
Due to the combination of stainless steel and anodized aluminium housing the mounting is easy with a glue. The sensor has 6 m very high rugged and flexible 4-wire per axe cable. This makes it easy to place it on difficult places fixing with a screw M2. As an option, we supply the sensor with a Dallas ID and a Shunt resistor in the connector if possible. A calibration for the sensor is obligatory.
Features
Dummy-WorldSID
Compliant SAE J211
DC MEMS PR Accelerometer
High Shock
Low Mass
Application
Some of the use cases for the BST 28C Triaxial include:
At a Glance
Best for: Undamped three-axis acceleration inside the WorldSID crash test dummy
Range: 500, 1,000 or 2,000 g; to 4,000 Hz; 8,000 g shock limit
Size & mount: 0.54 × 0.42 × 0.50 in (13.65 × 10.65 × 12.7 mm), 0.60 oz (17 g), 1 × M2
Environment: IP64, −40 to 212 °F (−40 to 100 °C), damping ratio 0.05, SAE J211
Which BST 28C Triaxial range do I need?
Parameter | 500 g | 1,000 g | 2,000 g |
|---|---|---|---|
Range | ±500 g | ±1,000 g | ±2,000 g |
Sensitivity (typ.) | 0.04 mV/g | 0.018 mV/g | 0.016 mV/g |
Frequency response | 2,750 Hz | 3,500 Hz | 4,000 Hz |
Resonance frequency | >13 kHz | >20 kHz | >22 kHz |
Shock limit | 6,000 g | 8,000 g | 8,000 g |
BST 28C Triaxial FAQ
Three ranges: 500 g, 1,000 g, and 2,000 g.
3 to 10 VDC constant.
−40 °F to 212 °F (−40 °C to +100 °C).
Additional cable length, connector, Dallas ID, shunt resistor, and DAkkS DIN EN ISO/IEC 17025:2018 calibration.
BST 28C: WorldSID Triaxial Crash Accelerometer
Bay SensorTec GmbH
Generating/Updating Your Configure-to-Order tool...
1

