IMV M Series Low Force Shakers

IMV M-series

Silent model suitable for abnormal noise inspection

Compact and silent design, but also powerful enough for full-scale tests.

Request
A Quote
Most Quotes sent in 3-4 hours

QUESTIONS?
ASK OUR EXPERTS
Contact your local W5 Representative

Product Details

Features

■Silent design featuring a built-in cooling fan: A DC-powered cooling fan is built into the shaker. Natural air-cooling is also used when the cooling fan is stopped for silent operation (with a reduction in performance).

Outward Dimensions

System Model			Unit	m030/MA1-CE	m060/MA1-CE	m120/MA1-CE	m030H/MA1
System Specifications	Frequency Range		Hz	0－3000	0－3000	0－2000	1000－10000
	Rated Force	Sine	lbf	67	135	270	85
		Random	lbf rms	47	94	189	60
		Shock	lbf	67	135	270	85
	Maximum Acc.	No load	g	51	51	51	20
		0.5 kg load	g	28	35	42	16
		1 kg load	g	19	27	36	13
	Maximum Velocity		in/s	63	63	63	-
	Maximum Displacement		inp-p	1.0	1.2	1.2	-
	Maximum Load		lbs	33	33	265	33
	Power Requirements		kVA	0.4	0.7	1.1	0.5
Vibration Generator	Model			m030-CE	m060-CE	m120-CE	m030H
	Armature Support Method			Diaphragm spring	Diaphragm spring	Air suspension	Rubber spring
	Armature Mass		lbs	1.3	2.7	5.3	4.2
	Armature Diameter		φin	4.5	4.5	6.9	2.6
	Dimensions	Diameter (Φ)	in	7.5	9	12.6	7.5
	Dimensions	Height	in	10	11	13	11
	Mass		lbs	49	90	245	66
Power Amplifier	Model			MA1-CE	MA1-CE	MA1-CE	MA1-CE
	Maximum Output		kVA	1.0	1.0	1.0	1.0
	Dimensions	Width	in	17	17	17	17
		Height	in	6	6	6	6
		Depth	in	17	17	17	17
	Mass		lbs	55	55	55	55
	Cooling Method			Air Cooling	Air Cooling	Air Cooling	Air Cooling
Cooling	Blower			Housed in vibration generator	Housed in vibration generator	Housed in vibration generator	Housed in vibration generator

* The displacement at the lower limit of frequency (1,000 Hz) and maximum acceleration (20 g) is so small that there is no certified value.
* Power supply: single-phase AC100 V/200 V or AC110 V/220 V or AC120 V/240 V ±10% 50/60 Hz. A transformer is required for other supply voltages.
* Insulation pad (W16.1 × H1.8 × D16.2 in) is standard equipment.
* The specification shows the maximum system performance. For long-duration tests, system must be de-rated up to 70%. Continuous use at maximum levels may cause failure. Please contact IMV if your system operates at more than 70%.
* Frequency range values vary according to the sensor and vibration controller.

System Model			Unit	m130LS/MA1-CE
System Specifications	Frequency Range		Hz	2-1000
	Rated Force	Sine	lbf	292
		Random	lbf rms	146
		Shock	lbf	292
	Maximum Acc.	No load	g	13
		0.5 kg load	g	12
		1 kg load	g	11
	Maximum Velocity		in/s	39
	Maximum Displacement		inp-p	2.0
	Maximum Load		lbs	220
	Power Requirements		kVA	1.1
Vibration Generator	Model			m130LS-CE
	Armature Support Method			Air suspension
	Armature Mass		lbs	22
	Armature Diameter		φin	7.1
	Dimensions	Width	in	16.1
		Height	in	23.3
		Depth	in	18.1
	Mass		lbs	550
Power Amplifier	Model			MA1-CE
	Maximum Output		kVA	1.0
	Dimensions	Width	in	17
		Height	in	6
		Depth	in	17
	Mass		lbs	55
	Cooling Method			Air Cooling
Cooling	Blower			Housed in vibration generator

* Power supply: single-phase AC100 V/200 V or AC110 V/220 V or AC120 V/240 V ±10 % 50/60 Hz. A transformer is required for other supply voltages.
* The specification shows the maximum system performance. For long-duration tests, de-rating by up to 70% must be applied. Continuous use at maximum levels may cause failure. Please contact IMV if you use more than 70%.
* Frequency range values vary according to the sensor and vibration controller.

Head expander

Model	Dimensions W × H × D (in)	Mass (lbs)	Maximum frequency (Hz)	m030-CE	m060-CE	m120-CE
TBV-125-□-A	4.9 × 4.9 × t0.8	2.0	2,000	○	○
TBV-200-□-A	7.9 × 7.9 × t0.8	5.5	1,500	○^*	○	○
TBV-315-□-A	12.4 × 12.4 × t1.2	18.7	1,000		○^*	○
^*TBV-400-□-A	15.7 × 15.7 × t1.4	31.7	600			○^*

Vertical auxiiary table

"-A” at the end of model number shows that material is aluminum alloy.
Add the vibration generator type where "□” is shown.

* A supplementary guidance system using linear bearings is used with the vibration generator when combined with the head expander. Armature mass is increased due to the addition of the guide support.

Slip table

Model	Dimensions (in)	Maximum frequency (Hz)	Mass (lbs)
Model	Dimensions (in)	Maximum frequency (Hz)	m030-CE	m060-CE	m120-CE
TBH-200	7.9 × 7.9	500	8.8	8.8	12.1
TBH-315	12.4 × 12.4	500	16.5	16.5	19.8
TBH-400	15.7 × 15.7	500	━	27.1	30.8

Horizonal Table

* Slip plate material is aluminum alloy.

2-axis changeover vibration shaker system

■ m-series multi-axis system

A range of small-size systems, including 2-axis and 3-axis simultaneous systems, employing the popular m-series vibration generators and patented Integrated Cross Coupling Bearing Unit (ICCU) multi-axis armature/load support technology.

●Compact design
●Low noise (ideal for squeak-rattle testing)
●High precision measurement
●Low power consumption

■ System specifications

Rated force	270 lbf
Table size	7.9 × 7.9 in
Maximum frequency	500 Hz
Maximum acceleration	3.0 g
Maximum displacement	0.4 inp-p
Maximum payload	22 lbs
Cooling method	Air cooling
System noise	55 dB (A)
Weight	Approx. 1,610 lbs
Power requirements	3 φ 200 V, 4 kVA