> Products > Shakers, Vibration, Packaging, & Drop Test > IMV Electrodynamic Shaker Systems + Fixtures, Slip-tables, & Service > IMV Single Axis Shakers

Smart Solutions. Proven Results.

IMV A-Series

Air-Cooled, Electro-Dynamic Shakers

A new standard created through listening to our customers.

A wide range of models. The A-series meets the needs for such a versatile test environment. Advanced automatic energy saving, high level of functionality and a protected test environment. Ask us about our Innovative time & cost saving features found only on IMV technologies

2,470 lbf | 4,940 lbf | 6,800 lbf | 10,120l bf | 14,620 lbf | 16,700 lbf models with standard VFD air-cooling

Request
A Quote
Most Quotes sent in 3-4 hours

QUESTIONS?
ASK OUR EXPERTS
Contact your local W5 Representative

Product Details

IMV-Smart^TM technology

① Improvement of performance

■ Improvement in excitation force

When compared with the conventional i- & J-series, the A-series has increased relative excitation force.

・Increased force per system power requirement
・Increased force per system mass
・Increased force per system size

Improvement in excitation force

■ Standard 3.0 inp-p displacement
*Only for A30, A45, A65, A74

A-series has a displacement of 3.0 inp-p (3-inch stroke), which provides a good balance within the specifications for velocity, acceleration and displacement. This single system can be used for a very wide variety of tests.

Standard 76.2mmp-p displacement

■ Increase in frequency range

In addition to the increased displacement of 3.0 inp-p, the maximum frequency range is also increased when compared to the i- and J-series.

Increase in frequency range

■ Adoption of new module

Featuring a power amplifier with an upgraded power element, the A-series achieves low noise and high efficiency. This upgrade is standard for all A-series models.

Adoption of new module

② User-friendly and secure

■ Lower power consumption

In comparison with the same class of conventional systems (i, J-series), the A-series achieves lower power consumption. Energy savings are increased across all force ranges thanks to an automatic energy-saving function.

Lower power consumption

■ International safety standards

A-series complies with international safety standards.

International safety standards

③ User-friendly interface

LAUNCHER

Rapid generation of tests from a set of pre-defined templates that conform to most international test standards.

A screenshot of a computer Description automatically generated with medium confidence

SYSTEM MONITOR

Remote monitoring of test status over the internet.

The status of the test, as well as the amplifier or shaker operation, can be viewed on a remote PC using a standard internet browser.

A screenshot of a computer Description automatically generated with medium confidence
Home screen

Graphical user interface Description automatically generated
Home screen (Error)

A picture containing treemap chart Description automatically generated
Eco screen

Graphical user interface Description automatically generated
Camera screen

A screenshot of a computer Description automatically generated with medium confidence
Chamber screen

A computer and a tablet Description automatically generated with low confidence

System Model				Unit	A11/EM1HAM	A22/EM2HAM	A30/EM3HAM	A45/EM4HAM	A65/EM5HAM	A74/EM10HAM
System Specifications	Frequency Range			Hz	0－4500	0－3300	0－2600	0－2600	0－2600	0－2600
	Rated Force	Sine		lbf	2,470	4,940	6,800	10,120	14,620	16,700
		Random		lbf rms	2,470	4,940	6,800	10,120	14,620	16,700
		Shock		lbf	4,945	9,890	13,500	20,240	29,240	50,000
		High Velocity Shock		lbf	3,710	8,090	11,250	18,000	27,000	38,200
	Maximum Acc.	Sine		g	102	102	92	92	92	102
		Random		g rms	65	65	65	65	65	65
		Shock		g peak	204	204	185	183	184	204
		High Velocity Shock		g peak	153	166	154	163	169	204
	Maximum Vel.	Sine		in/s	79	79	79	79	79	79
		Shock		in/s peak	99	99	99	99	99	99
		High Velocity Shock		in/s peak	138	138	138	138	138	138
	Maximum Disp.	Sine		inp-p	2.0	2.0	3.0	3.0	3.0	3.0
	Maximum Disp.	High Velocity Shock		in/s peak	2.5	2.5	3.0	3.0	3.0	3.0
	Maximum Travel			inp-p	2.5	2.5	3.2	3.2	3.2	3.2
	Maximum Load			lbs	441	661	882	1,323	2,205	2,205
	Power Requirements			kVA	20.4	30	36	57	83	100
	Breaker Capacity			A	30	50	60	100	125	175
Vibration Generator	Model				A11	A22	A30	A45	A65	A74
	Armature Mass			lbs	24	49	73	110	159	164
	Armature Diameter			φin	8.3	11	11.4	17.2	17.6	17.6
	Allowable Eccentric Moment			lbf in	2,600	6,200	7,500	13,700	13,700	13,700
	Dimensions	Width		in	37	41	44	49	52	52
		Height		in	33	38	42	48	50	50
		Depth		in	27	31	33	41	41	41
	Shaker Body Diameter			φin	23	27	29	33	37	37
	Mass			lbs	2,381	3,527	4,409	6,614	9,260	10,585
Power Amplifier	Model				EM1HAM-A11	EM2HAM-A22	EM3HAM-A30	EM4HAM-A45	EM5HAM-A65	EM10HAM-A74
	Maximum Output			kVA	12	24	31	44	68	100
	Amplifier Bay			s	1	1	1	2	2	3
	Dimensions	Width		in	23	23	23	46	46	69
		Height		in	77	77	77	77	77	77
		Depth		in	34	34	34	34	34	34
	Mass			lbs	1,036	1,235	1,300	2,205	2,535	4,409
Controller	Vibration Controller				See Vibration Controller K2	See Vibration Controller K2	See Vibration Controller K2	See Vibration Controller K2	See Vibration Controller K2	See Vibration Controller K2
Cooling	Cooling Method				Air cooling	Air cooling	Air cooling	Air cooling	Air cooling	Air cooling
	Blower	Dimensions	Width	in	28	28	28	46	45	58
			Height	in	56	61	61	84	94	111
			Depth	in	31	37	37	32	36	37
		Mass		lbs	309	463	463	618	503	705
		Wattage		kw	3.7	5.5	5.5	11	18.5	30
		Duct Hose Diameter		φ	4.92	7.87	7.87	9.84	9.84	9.84

* Random force ratings are specified in accordance with ISO5344 conditions. Please contact IMV or your local distributor with specific test requirements.
* Power supply: 3-phase 220/480V, 60Hz. A transformer is required for other supply voltages.
* Breaker capacity for 480V.
* Above 4,000Hz, the force rolls-of f at a rate of -6dB/oct.
* Above 2,000Hz, the force rolls-of f at a rate of -12dB/oct.
* An export license is required for exporting a shaker system of over 11,240 lbf sine force.
* For random vibration tests, please set the test definition of the peak value of acceleration waveform to operate at less than the maximum acceleration of shock.
* Frequency range values vary according to sensor and vibration controller.
* Armature mass and acceleration may change when a chamber is added.
* Mass and dimensions may change for CE-marked systems.