Standard Features:

• LCD: 350°C (662°F) maximum temperature
• LCC: 260°C (500°F) maximum temperature
• Lockable Disconnect Switch on the control panel for easy servicing
• Protocol 3™ control with large LCD display, integrated data logging capabilities and USB port for simple oven set-up and data export
• Stainless steel interior with all interior seams continuously welded on the insulation side to protect the work chamber from contamination
• Programmable door lock prevents operators from opening oven door when cycle is in process
• Available with HEPA filtration - Recirculated airflow is 100% HEPA ( High Efficiency Particulate Air) filtered for operation at ISO Class 5 (Class 100) throughout the cycle.
• Magnehelic™ gauge monitors the HEPA filter pressure drop so you know when it is time to replace the filter
• UL & C-UL Listed open control panel
• Modbus communications connection (RS485) for remote monitoring and recording
• End of cycle, and high limit audible and visual alarm, that can be seen and heard from a distance.

Options:

• Silicone-free construction
• Door interlock switch turns off heater and fan when door is opened
• Cleaning and triple bagging in clean room prior to shipment
• Oxygen concentration monitor system
• Chart recorders
• Three color process stack light
• Pass-through doors (Air atmosphere only)
• Extra shelves
• Data acquisition software
• Non-HEPA filter option
• Customization available
• CE compliance

LCC2-14 AND LCD2-14 CLEAN PROCESS CABINET OVEN

Despatch's LCC/LCD2-14 Clean Process Cabinet Ovens are designed to meet the demands of production and large scale R&D environments. A variety of tailored options are available to meet your specific needs. Typical applications for these ovens include die-bond curing and other semiconductor packaging processes, depyrogenation, sterilizing and drying for life sciences. The ovens are configured for 50/60 Hz and available in all voltages used around the world.

Where minimal contamination is essential, the LCC/LCD2-14 Series Cabinet Ovens offer the highest standards in HEPA filtration. Re-circulated airflow is 100% HEPA filtered for operation at ISO Class 5 (Class 100) or better within the oven chamber. Also available in a non-HEPA filter option.

It is available in two different atmosphere configurations:

Inert Atmosphere

Allows nitrogen (or other inert gas) to be injected into the chamber to lower the oxygen level to prevent oxidation of products. A water cooling coil is provided for rapid cooling. Control of nitrogen flow and water cooling is programmable through the Protocol 3™ controller.

Class A Atmosphere

Meets NFPA requirements for processing flammable solvents, including a pressure relief panel (rear of oven), purge timer, and forced exhaust.

Air Atmosphere

A forced exhaust fan is included on the air atmosphere unit for rapid cooling. 

Advanced control | Protocol 3™ is a microprocessor-based temperature and hi-limit controller with large LCD display and real time clock for auto start capability. The LCD display shows temperature readings along with clear, detailed information on oven status. Protocol 3™ features three operating modes for quick and easy operation: Manual mode, Timer mode and Pro.file mode. The data-logging functionality enables reporting and analyzing and data files can be exported via the controller's USB port. Modbus RS485 communications are included for easy data access.

Remote operation, programming and data logging | The Despatch Protocol Manager network utility software enables the operation of up to 32 Protocol 3™ and/or Protocol Plus controllers from a single, remote PC using RS485 communication.